Post by account_disabled on Feb 22, 2024 8:43:45 GMT
Thermal installations with geothermal heat pumps can be used commercially, industrially, privately for heating schools, kindergartens, residential buildings. Geothermal energy can be extracted using geothermal power plants and geothermal heat pump units. There are two types of geothermal installations. The former uses hot springs (geysers, volcanoes) with temperatures between 1 and 2. The second is a device that utilizes geothermal heat. About half of the world's geothermal power plants use dry steam deposits from geothermal groundwater. But there are very few of them, and almost all of them are located with geysers and thermal springs: there are few such places in Russia Kamchatka Peninsula, Western Siberia (Omsk, Novosibirsk region), Dagestan.
The availability and attractiveness of this energy source is certainly very high: a clean Job Function Email List free and inexhaustible source of heat sounds like the fantastic predictions of the boldest futurists. Geothermal power plants use the method of extracting heat directly from groundwater. It's simple: pump water through pipes laid in wells. Through these pipes, into steam under pressure, and the steam falls on the blades of the steam turbine equipment at the surface outlet and makes them spin.
At the same time, electricity is generated, and the steam turns into water again, which enters the ground for heating, and so on. Geothermal power plants are built in Kamchatka, Iceland, Kenya, New Zealand wherever there is a relatively easily accessible source of high temperature (since water has to be turned into steam). Meanwhile, steam is readily available without the need for extremely expensive wells drilled kilometers deep in the Earth's crust.
The availability and attractiveness of this energy source is certainly very high: a clean Job Function Email List free and inexhaustible source of heat sounds like the fantastic predictions of the boldest futurists. Geothermal power plants use the method of extracting heat directly from groundwater. It's simple: pump water through pipes laid in wells. Through these pipes, into steam under pressure, and the steam falls on the blades of the steam turbine equipment at the surface outlet and makes them spin.
At the same time, electricity is generated, and the steam turns into water again, which enters the ground for heating, and so on. Geothermal power plants are built in Kamchatka, Iceland, Kenya, New Zealand wherever there is a relatively easily accessible source of high temperature (since water has to be turned into steam). Meanwhile, steam is readily available without the need for extremely expensive wells drilled kilometers deep in the Earth's crust.